Battery Selector Switch MK111

Selecta MKIII Battery Selector / Switch

Can use batteries alternatively or simultaneously; fitted with copper contacts, stainless steel springs, PC/PTB/Fiberglass flame resistant casing, protective cable base; extra ring-nut for flush mounting (Ø size 95 mm); type approved by ISO 8846 MARINE EN 28846. . A) "MK II" version.

Selectable options: Bank/battery “1”, bank/battery “2” or 1+2 simultaneously. Includes device that disconnects the alternator power automatically if is under the “OFF” position without switching off the engines; type-approval no. DIP006907SP. B) 

Version MK III. connects the engine start-up batteries and the service batteries simultaneously in position “1”, keeping the start-up batteries separately with motors, thus minimising the risk of an accidental discharge if case of an emergency. The two circuits are connected among them under position “2”, type-approval no. DIP006907SP

Dimensions:
Base 104 x 104mm
Height 80mm
Pins 10

Max Power:
Intermittent 450A
Continuous 300A